Black Pearl Trim & Tire Armour For Grey Trim
A super long lasting coating which, will last up to 6 months on lower areas of the trim, & even longer on less exposed areas of the cars' plastic trim.
When applied correctly and fully cured, Black Pearl won't smear and is dry to the touch.
The coating won't wash off even when presser washed.
Black Pearl Trim & Tire Armour is easy to apply to trim and other surfaces. Including, rubber or vinyl floor mats & older soft top cars with vinyl roofs.
The coating can be layered to help increase durability.
If you have been disappointed by the other trim restoring products, then this is for you. Black Pearl Trim & Tire Armour is available,
in a grey tint, It can fully restore your trim making it look renewed & revied.
Why Plastic Fades In The First Place
Grey plastic trim like those on older ford transit vans can quickly become damaged by UV rays,
chemicals like traffic film remover or even products that contain solvents or silicons, as these can damage the plastic by drying it out.
Plastics, used on cars often fade quickly as they have a lot of impurities in them, Then when they
Are exposed to the elements, the result is, the colour will fade quicker than you think.
New or Faded Plastic Trim
Black Pearl is a coating that is tough & flexible.
It can be used to coat any rubber, vinyl, or plastic surface.
Grey Tint To Restore Grey Trim
The grey tint in this version of Black Pearl Trim & Tire Armour means that you can restore majorly faded or oxidised grey trim to look revived & revitalised quickly and easily.
Black Pearl can also be layered up until you have fully covered all of the old faded trim.
We would recommend using Black Pearl Trim & Tire Armour matt finish, for plastic trim or bumpers,
unless you prefer a shiny look when our gloss finish will fulfil your requirements.
What Is This Product For
if you have any bumpers or plastic trim found on cars & vans like ford transit second generation (1986–2003) third generation (2000–2014)
& some jeeps models it will restore all the grey trim on your vehicle restoring, enhancing & protecting the plastic trim making it look almost like new again
Matt or OEM Look To Your Grey Trim
The matt coating will leave the coated trim with an OEM & natural look with no sheen to the grey plastic
We would always recommend using our matt version when using Black Pearl Trim & Tire Armour on any plastic trim but
We know that some may want a shinier or glosser look to there restored grey trim which is why we have a gloss version as well which can be used on all types of grey trim to restore and leave glossy look
Why Black Pearl Trim & Tire Armour Is Unlike Other Trim Restoring Products
The coating once applied and fully cured will not smear or remain greasy.
Within a short period of time, Black Pearl will be dry to the touch, so this means no dirt or dust will stick to the surface.
As it doesn't contain any silicons none of the product will transfer to your hands or clothes, should you touch the treated surface.
It won't Just Wash Off
Don’t worry when it rains, or you wash your car next, the coating will remain in place even when using a power washer,
unlike most other water-based products. Also with products that contain silicon, they offer minimal protection against water and chemicals, especially when used with a presser washer.
How long will it last
Black Pearl Trim & Tire Armour will last a long time on trim. You can expect many months and even years when it is applied to low traffic areas.
Black Pearl Trim & Tire Armour is super easy to apply and will leave amazing results.
How to use
Use only on a dry surface, wipe down with an IPA least twice to ensure you remove any waxes, oils or old dressing.
Apply Black Pearl Trim & Tire Armour using the foam roller & tray included in the pack (see guide for additional information on preparation and application).
You Don't Need A Lot
You don’t need a lot of Black Pearl Trim and Tire Armour, a little goes a long way. Apply a thin coat of the product to the surface,
Curing & Drying
leave for 20 minutes to cure and apply a further coat. We would always recommend applying at least two coats, but you can still apply more to achieve the finish you want.
To ensure maximin durability, once the final coat has been applied, leave for 5 hours to fully cure.
Apply As Many Layers As You Like
You can apply as many coats as you like, but always leave at least 20 minutes between each coat.
Always apply the coating when the air temperature is at least 10 oC; otherwise, the coating will have trouble curing to the surface correctly.
It is best to mask off any surfaces that you don’t want to have Black Pearl on, or otherwise, have two microfibre towels handy, one wet & one dry to wipe the coating off if you make any mistakes during the application process.